IFD 440 Network Config Questions

So far, this is what I have tried as per the Avidyne Pilot Guide:

Defined WIFI Configurations:

Pg. 6-70:  In Maintenance mode:  Set up "Stratus" as a Remote WiFi and also have the IFD440 set up as a Local WiFi

Selecting Network Configuration:

Pg. 6-73:  Started the IFD440 in flight mode. Went to the AUX page, SETUP tab, and selected the Stratus as the desired SSID/Name.

On my Ipad, in settings selected Stratus for WiFi.  With this, I was able to see traffic on Foreflight but there was no traffic and no radio information on the IFD100.  Radio from the IFD440 in the panel was not being transmitted to the IFD100.

I tried setting the IFD440 (Local WiFi) as the desired SSID/Name with selecting IFD440 as the WiFi on the Ipad.  This gave me the radio information on the IFD100 and the NavData, but still no traffic or weather.

Is there a way to set up this system which will allow the IFD440 to have all of its function on the IFD100 and include the traffic and weather from Stratus?

How specifically do you set that up?  I didn't see any settings to turn traffic on or off.

I know you said it was only on the Stratus3, so can you say it definitely won't work with Stratux?  or is there a chance that it might work?

Thanks for the quick response. I go to the Apple app store and it shows that I have the current version and there is no update available.

As no one responded to the above, it seems I'm the only one experiencing this.  FF points to Avidyne to make a fix but Avidyne says FF must make a change.  In reality, it seems no one has this issue.  Would someone do a quick test for me when they next fly if they use their IFD as the WiFi source and use both FF and the IFD 100.  When using FF with the IFD running in the background, I do not get traffic or some weather products on FF.  With the IFD in the background, on the device page of FF, I see ONLY the Avidyne IFD connected (provides GPS and flight plan transfers). I don't have an option on the map page to even see traffic. Once I quit out of the IFD 100, the FF device page then shows the same Avidyne IFD but also an ADS-b connected (provides GPS and ADS-B).  Without the ADS-B (when the IFD100 is running) perhaps that's why I get no traffic or some weather on FF.  Only guessing but I'd love to solve this riddle. The top left pix is the device page when the IFD is running in the background and the top right pix is when the IFD100 app is quit out of.

The circled settings on the map page are not even an available choice when I have the IFD100 running in the background.  IF someone could confirm they are able to get these option in FF even with the IFD 100 running (when using the IFD 540/440 as the WiFi source), then I know it is something peculiar to my set up only.