IFD100 Charts Seletion Bug?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Having just received access to charts on my IFD100s, I immediately noticed what appears to be a bug in selecting charts from the Chart Selection page. I am running the IFD100 on an iPad mini with iOS 9.3.5 as well as an iPad Pro 9.7 with iOS 11.2.2 with identical results. Both iPads were power cycled as well as soft reset with no changes in IFD100 behavior. While the snapshots below were taken with the IFD100 offline, the same IFD100 behavior occurs when running the IFD540 Trainer on one iPad and the IFD100 on the other across network. 

For any airport chart selection page, it is extremely difficult if not impossible to directly select the second available chart in the entire list of charts for that airport. All other charts are easily selectable. It does not appear to matter whether the iPad is in portrait or landscape orientation. It also doesn't matter what type of chart it is (ARR, DEP, APP, etc). 

In the snapshot below, it is virtually impossible to directly select the KTEB MAZIE 2 RNAV ARR:

For KORD, I have not found it possible to directly select the BENKY 4 RNAV ARR:

For 3CK below, I cannot directly select the RNAV (GPS) RWY 8 approach:

It is possible to show these charts on the IFD100 by adding the desired procedure to the FMS FPL and selecting the chart display from the FPL; however, if the case of KORD for example, you select both the BENKY 4 RNAV ARR and any KORD approach, then the FPL chart button defaults to the approach chart and only toggles between the approach and airport charts. KTEB woul have the same issue with both the MAZIE 2 RNAV ARR and any KTEB approach in the FPL.

Has anyone else seen this IFD100 behavior?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
dmtidler Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 12 Feb 2016 Location: USA Status: Offline Points: 617	Post Options Post Reply Quote dmtidler Report Post Thanks(0) Quote Reply Topic: IFD100 Charts Seletion Bug? Posted: 11 Jan 2018 at 2:48pm
	Having just received access to charts on my IFD100s, I immediately noticed what appears to be a bug in selecting charts from the Chart Selection page. I am running the IFD100 on an iPad mini with iOS 9.3.5 as well as an iPad Pro 9.7 with iOS 11.2.2 with identical results. Both iPads were power cycled as well as soft reset with no changes in IFD100 behavior. While the snapshots below were taken with the IFD100 offline, the same IFD100 behavior occurs when running the IFD540 Trainer on one iPad and the IFD100 on the other across network. For any airport chart selection page, it is extremely difficult if not impossible to directly select the second available chart in the entire list of charts for that airport. All other charts are easily selectable. It does not appear to matter whether the iPad is in portrait or landscape orientation. It also doesn't matter what type of chart it is (ARR, DEP, APP, etc). In the snapshot below, it is virtually impossible to directly select the KTEB MAZIE 2 RNAV ARR: For KORD, I have not found it possible to directly select the BENKY 4 RNAV ARR: For 3CK below, I cannot directly select the RNAV (GPS) RWY 8 approach: It is possible to show these charts on the IFD100 by adding the desired procedure to the FMS FPL and selecting the chart display from the FPL; however, if the case of KORD for example, you select both the BENKY 4 RNAV ARR and any KORD approach, then the FPL chart button defaults to the approach chart and only toggles between the approach and airport charts. KTEB woul have the same issue with both the MAZIE 2 RNAV ARR and any KTEB approach in the FPL. Has anyone else seen this IFD100 behavior?

dmtidler Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 12 Feb 2016 Location: USA Status: Offline Points: 617	Post Options Post Reply Quote dmtidler Report Post Thanks(0) Quote Reply Posted: 11 Jan 2018 at 9:37pm
	Apparently I went too fast typing the forum topic this afternoon...maybe an admin could correct my misspelling of “Selection” in the forum topic?

teeth6 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 10 Mar 2014 Status: Offline Points: 741	Post Options Post Reply Quote teeth6 Report Post Thanks(0) Quote Reply Posted: 14 Jan 2018 at 10:20am
	I am also seeing that behavior on the IFD100 app. The times I have wanted to select the 2nd approach in the list and could not, I ended up using the IFD540 instead but clearly there is a bug preventing the selection of the 2nd item in the approach list. Edited by teeth6 - 14 Jan 2018 at 10:21am

edanford Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 21 Nov 2011 Location: Austin Tx Status: Offline Points: 116	Post Options Post Reply Quote edanford Report Post Thanks(0) Quote Reply Posted: 14 Jan 2018 at 3:30pm
	Definitely a IFD100 bug. I verfied it too
	Ed

dmtidler Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 12 Feb 2016 Location: USA Status: Offline Points: 617	Post Options Post Reply Quote dmtidler Report Post Thanks(0) Quote Reply Posted: 23 Feb 2018 at 8:45am
	IFD100 version 10.2.1 appears to have corrected this issue. Thanks Avidyne!

teeth6 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 10 Mar 2014 Status: Offline Points: 741	Post Options Post Reply Quote teeth6 Report Post Thanks(0) Quote Reply Posted: 23 Feb 2018 at 8:59am
	10.2.1 is the version we have been on for awhile and I am still seeing the issue. I cannot select the 2nd procedure in a list in charts but thought it would be the NEXT release that would fix this.

AviSteve Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2245	Post Options Post Reply Quote AviSteve Report Post Thanks(0) Quote Reply Posted: 23 Feb 2018 at 9:12am
	It is fixed in 10.2.1 and that version was just put up on the Apple store yesterday.
	Steve Lindsley Avidyne Engineering

teeth6 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 10 Mar 2014 Status: Offline Points: 741	Post Options Post Reply Quote teeth6 Report Post Thanks(0) Quote Reply Posted: 23 Feb 2018 at 9:23am
	Understood. I had 10.2.1 according to the info on my app so maybe this is a re-release of it with the bug fixes? I just downloaded it. Thanks

dmtidler Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 12 Feb 2016 Location: USA Status: Offline Points: 617	Post Options Post Reply Quote dmtidler Report Post Thanks(0) Quote Reply Posted: 24 Feb 2018 at 10:32pm
	Officially, it is IFD100 software version 10.2.5 if that helps.

teeth6 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 10 Mar 2014 Status: Offline Points: 741	Post Options Post Reply Quote teeth6 Report Post Thanks(0) Quote Reply Posted: 25 Feb 2018 at 8:56am
	That makes sense ! Thanks.