ghost traffic target
Printed From: Avidyne
Category: Avidyne General
Forum Name: SkyTrax Series ADS-B Receivers & Transceivers
Forum Description: Topics on the Avidyne SkyTrax 978 MHz Receivers & Transceivers
URL: http://forums.avidyne.com/forum_posts.asp?TID=1088
Printed Date: 25 Dec 2024 at 12:35pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: ghost traffic target
Posted By: jblodgett
Subject: ghost traffic target
Date Posted: 12 Jun 2016 at 9:16am
I have an IFD540, AXP340, EX600 and I just had a Skytrax100 installed. I believe the Aspen 1000 Pro is the pressure altitude source for all of this. I am now getting a ghost traffic return on everything (panel mount as well as my Stratus/iPad) at my altitude and distance (0 ft and 0 miles). This comes and goes but it is quite annoying because it causes continual traffic alerts. The ghost target is usually 0 feet away but sometimes it is as much as +/-200 feet. Does anyone know what causes this and what can be done to prevent it? Previously with just the AXP340 for ADS-B out and the Stratus/iPad I was not getting these ghost targets.
|
Replies:
Posted By: AviSimpson
Date Posted: 13 Jun 2016 at 9:44am
PM Sent
-------------
Simpson Bennett
Avidyne Corporation
Product Manager
|
Posted By: AviSimpson
Date Posted: 13 Jun 2016 at 9:55am
There are possibly some configuration settings that could be causing this, however, if you are flying in the TX, AR and MS areas (to name a few), we have heard that the FAA had some issues where they were sending TIS-B information to ADS-B Out Aircraft. The FAA has also created a form to log these events so they can reset whatever equipment might be causing the error ( http://docs.google.com/forms/d/1M5Gb0X54OHntMw_nYSZVxo1xgxIK-ymdyCxHwsX9Hcg/viewform?c=0&w=1" rel="nofollow - https://docs.google.com/forms/d/1M5Gb0X54OHntMw_nYSZVxo1xgxIK-ymdyCxHwsX9Hcg/viewform?c=0&w=1 )
-------------
Simpson Bennett
Avidyne Corporation
Product Manager
|
|