Help IFD 100
Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD100 Mobile App
Forum Description: Topics on Avidyne's IFD100 Mobile App
URL: http://forums.avidyne.com/forum_posts.asp?TID=2106
Printed Date: 26 Dec 2024 at 2:21am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Help IFD 100
Posted By: hugomg
Subject: Help IFD 100
Date Posted: 27 Oct 2020 at 8:48am
|
Dear all, I am using an IFD 100 S/W version 10.2.4.1 on an ipad Mini together with an IFD540/IFD440 combi both running S/W Ver 10.2.2.0.A. Avidynesettings on the ipad, Sys ID, Device Nr. etc. are all configured correctly, WIFI is on on den 540/440s but the Avidyne app does not connect. Is ist necessary to upgrade the 540/440 and should this solve the problem or could you advise what i can do in this environment? Kind regards Michael Geringer
|
Replies:
Posted By: dmtidler
Date Posted: 27 Oct 2020 at 10:09am
|
Try turning off the WiFi from the IFD440. Verify your IFD100 settings indicate IFD540 for IFD Type and the IFD Chassis ID # matches the the IFD540 Sys ID # on the AUX SYS Software Status tab. Alternatively, you could turn off the IFD540 WiFi and match the IFD100 settings to your IFD440. Once those settings are confirmed, try connecting your iPad mini to your panel IFD. This all assumes either or both of your panel IFD’s are set up in their default WiFi host mode. This link should take you to the IFD100 Pilot Guide: https://www.avidyne.com/avidyne?wpdmdl=4200&ind=1553539112428" rel="nofollow - https://www.avidyne.com/avidyne?wpdmdl=4200&ind=1553539112428
|
Posted By: hugomg
Date Posted: 27 Oct 2020 at 12:18pm
|
Thank You. |
Posted By: zephyrus
Date Posted: 23 Dec 2020 at 12:08am
Are there any requirements as to what the matching ID can be? if the 540 is unit 1 and the 440 unit 2, can the IFD100 (set to unit 2) communicate with the 440 with the 540 wifi off?
|
dmtidler wrote:Posted By: AviSteve
Date Posted: 27 Dec 2020 at 9:10am
Yes, you can connect the IFD100 to either of the IFDs. Be sure to go into the iPad settings for the IFD100 app and set IFD Chassis ID# to match the IFD that you're connecting to. As you mentioned, we recommend turning WiFi "Off" on the other IFD. ------------- Steve Lindsley Avidyne Engineering |
Posted By: zephyrus
Date Posted: 27 Dec 2020 at 11:36am
This will not work unless both IFD's are set via dip switches to ID#1. The iPad settings for IFD100 Chassis ID# don't seem to matter. See this thread: http://forums.avidyne.com/flight-plans-not-importing_topic1424.html
|
Posted By: AviSteve
Date Posted: 28 Dec 2020 at 9:12am
I can assure you that chassis ID is not ignored. But it sounds like you have something that works for you, so that's good. ------------- Steve Lindsley Avidyne Engineering |