IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM

Print Page | Close Window

WIFI connect option not working

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=2442
Printed Date: 11 Apr 2025 at 10:23pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: WIFI connect option not working

Posted By: N8ZV
Subject: WIFI connect option not working
Date Posted: 22 Nov 2022 at 7:01pm

I upgraded to 10.3 on the 440 and now I cannot get an option to connect via WIFI with the IFD 100 (also upgraded). I believe I have the settings correct on the IFD 440 and the Ipad. Is there a common mistake I am making? Thanks! Paul C N8ZV

-------------
PCC

Replies:

Posted By: ricardo
Date Posted: 23 Nov 2022 at 2:01am

did you unblock the IPAD on the IFD440 network settings page? .. when you first connect a device on 10.3 it is connected in a blocked state, and cannot communicate with the IFD440 until you unblock it.

Posted By: N8ZV
Date Posted: 23 Nov 2022 at 4:23pm

Thanks for the response. I will see if I can get to the networks setting page. Just where is this? I do have the WIFI on.

Paul C

-------------
PCC

Posted By: AviSteve
Date Posted: 23 Nov 2022 at 5:18pm

On the Setup Page, under Connectivity, then Devices. You should see your device. Set it to Always.

-------------
Steve Lindsley
Avidyne Engineering

Posted By: N8ZV
Date Posted: 23 Nov 2022 at 8:37pm

Thanks! When I get out to the hangar I will try this. Speaking to these devices is like learning a new language!!

Paul Collins

-------------
PCC

Posted By: chflyer
Date Posted: 25 Nov 2022 at 9:25am

While there are always lots of people ready to help on the forum (including Avidyne), the first place to go with questions should always be the manual. That will often get a quicker answer than here and at the same time develops better in-depth familiarity with the IFD, being the sophisticated FMS that it is. This is especially true when a release has changed the operation and/or configuration of the IFD, such as with 10.3.

The instructions for setting up wifi on the IFD under 10.3 are very well described in the communications category of the setup key in the manual.

-------------
Vince

Posted By: N8ZV
Date Posted: 28 Nov 2022 at 9:45am

Yes, the instructions work - step by step. One thing I saw that was deleted was the "Allow/ignore" message. I initially thought this indicated an error, however I found the note that it had been deleted - after an closer inspection of the changes. Next time I will do a step by step read/apply session with updated software! Well, thanks again for the help and along we go.

Paul Collins

-------------
PCC