Synthetic Vision not working properly
Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=2699
Printed Date: 24 Dec 2024 at 1:18pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Synthetic Vision not working properly
Posted By: toddsanderson
Subject: Synthetic Vision not working properly
Date Posted: 07 Nov 2024 at 3:34pm
I have a "new to me SR22" that has Entegra PFD/MFD along with IFD 550/440/DFC90 installed. Everything works great other than the Synthetic Vision attitude display on the 550 is always showing a pitch down display and never changes. It is this way on the ground or in the air. The heading is properly displayed, but attitude is wrong. I did not see any information on calibrating the unit or any troubleshooting in the manual. Sorry for the sideways picture - new to this site. Any info is appreciated. 
|
Replies:
Posted By: MysticCobra
Date Posted: 09 Nov 2024 at 8:21am
| Section 7.5.22 of the Installation Manual has the calibration instructions that might help with your situation. |
Posted By: toddsanderson
Date Posted: 20 Nov 2024 at 9:11am
| Thank you for the manual. The calibration process fixed the issue. My installation required a -28 degree offset. The TAS was also not set which I assume helps aid in accuracy in cruise flight. |
Posted By: _phm_
Date Posted: 21 Nov 2024 at 4:29pm
| Same issue here. Just installed an IFD550, but the shop didn't configure this. |