AXP340/322 ADS-B Transponder

Print Page | Close Window

Volume too low

Printed From: Avidyne
Category: Avidyne General
Forum Name: AXP340/322 ADS-B Transponder
Forum Description: Topics on the Avidyne AXP340/322 ADS-B Transponder
URL: http://forums.avidyne.com/forum_posts.asp?TID=601
Printed Date: 25 Dec 2024 at 12:33pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: Volume too low

Posted By: brou0040
Subject: Volume too low
Date Posted: 13 Mar 2015 at 5:53pm

Is there any way to adjust the volume of the AXP-340?

I find that even with my headset turned all the way up that the altitude alert coming from the AXP-340 is very quiet.

Replies:

Posted By: Gring
Date Posted: 13 Mar 2015 at 7:19pm

Go into the maintenance mode by pressing the Function key while turning on power. Then scroll through the settings until you get to Volume. Raise the volume here, it will output a test with each change.

Posted By: brou0040
Date Posted: 16 Mar 2015 at 1:09am

Gring wrote:

Go into the maintenance mode by pressing the Function key while turning on power. Then scroll through the settings until you get to Volume. Raise the volume here, it will output a test with each change.

Thanks, didn't think about the maintenance mode...

Posted By: brou0040
Date Posted: 22 Mar 2015 at 12:11pm

I'll need to look into this more. The volume was set to 6, I increased it to 10, but the test audio didn't increase much. It was noticeably louder if I turned the intercom off. I have a feeling that my shop set the volume without the intercom on.