Print Page | Close Window

TAS600 Series Product Suggestions

Printed From: Avidyne
Category: Avidyne General
Forum Name: TAS600 Systems and ADS-B
Forum Description: Topics related to the Avidyne TAS600 Traffic Advisory Systems and ADS-B
URL: http://forums.avidyne.com/forum_posts.asp?TID=96
Printed Date: 25 Dec 2024 at 12:37pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: TAS600 Series Product Suggestions
Posted By: FlyingLester
Subject: TAS600 Series Product Suggestions
Date Posted: 24 Jun 2010 at 9:25am

This AvidyneLive topic is for product suggestions for the TAS600 Series Active Traffic Advisory Systems.  Please post new product suggestions or comment on existing suggestions.  Avidyne will be reviewing these posts closely as our product roadmaps evolve.  Avidyne is continually looking for ways to improve our products in order to make flying safer, simpler, and more useful.




Replies:
Posted By: scottman0
Date Posted: 11 Sep 2010 at 12:17pm

If we can upgrade from the TAS 600 to the 605, about how much would such an upgrade cost?



Posted By: TurboPA30
Date Posted: 18 Sep 2010 at 2:53pm
Could you please elaborate on the ADS-B upgrade paths for the existing traffic systems. E.G. there is a 605, but only a 610A. Does this mean there will be no 605A, or will the 605 become a 610A or????
THanks
Robert


Posted By: FlyingLester
Date Posted: 20 Sep 2010 at 2:29pm
All TAS products (TAS600, TAS605, TAS615, TAS620, and 9900BX) will be upgradeable to ADS-B In.  Each one will have an -A  variant.  We added the TAS605 and TAS615 this year and haven't had a chance to update the TAS600A material.

To answer scottman0's question about upgrade costs, it is currently $2,500 to upgrade from a TAS600 to TAS605.  This upgrade must be done at an Avidyne service center.  Please call Jared Butson at 781-402-7569 to arrange an upgrade


Posted By: n7ifr
Date Posted: 05 Aug 2013 at 8:13pm
I just installed and absolutely love the TAS 605 and look forward to the pre-paid "(A)" VERITAS ADS-B addition.  

My questions are:  
1.)  When can we expect the scheduled ADSB upgrade?
2.)  Will Avidyne have a solution for receiving ADS-B Wx (FIS-B)?  We would love to see this feature to integrate Wx to panel equipment (Aspen PFD/MFD/MX20) rather than external iPad Wx...

Thanks.

Tom 


Posted By: wsh
Date Posted: 05 Aug 2013 at 8:26pm
I have a tas605 and I was told that the difference with a tas 600 is that it will properly indicate the exact sector the traffic is in. I have noticed now a few times that at close range (within 2 miles range). The traffic will be indicated on my 00:30 to 01:00 while in reality it will pass me on my left side. I find this rather strange. Is this a calibration issue?


Posted By: AviJake
Date Posted: 20 Aug 2013 at 1:47pm
Good questions.  We have an expert in those areas here that I'll get to respond.   Pinging him now....

-------------
Steve Jacobson
sjacobson@avidyne.com


Posted By: dryan
Date Posted: 20 Aug 2013 at 2:19pm
Regarding n7ifr's questions:
  1. We plan to begin shipping the TAS-A upgrades in Q1 of 2014.
  2. Avidyne has not made any announcements regarding FIS-B In capabilities; however Avidyne considers ADS-B an essential part of the next generation airspace and plans to support ADS-B technology in a major way.  I think that both our past and future customers will be very happy with our ADS-B road map.  As much as I would like to discuss the exciting work that Avidyne is doing behind the scenes, we are not quite ready to make the ADS-B Wx portion of our road map public.


Posted By: dryan
Date Posted: 20 Aug 2013 at 2:27pm
wsh...

The behavior you describe is not typical of Avidyne TAS products.  The TAS600 and TAS605 use the same antenna system to determine azimuth, so there should not be a difference between the two.  What you describe sounds like it could be related to a sub-optimal antenna installation.  I recommend that you contact our technical support team at  888-723-7592 or 781-402-7592 to discuss.

Note that the accuracy of the bearing data will not impact the ability of the TAS system to provide traffic alerts; however it may make it more difficult for you to locate the traffic visually.  TAS and TCAS systems do not use bearing in their alerting algorithms.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net