Release 10.3.2.2

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic



   Here are the release notes for 10.3.2.2
Bug Fixes


 Fixed
     bug that prevented user waypoints with special characters in the name from
     being loaded
 Fixed
     display of FIS frequencies in the FSS frequency list
 Fixed
     known issues with interface to GFC autopilots
 Fixed
     GAMA 429 output to prevent the display of active waypoint from being
     delayed on Aspen PFD
 Fixed
     bug that allowed selection of an approach when every transition contained
     an RF leg
 Fixed
     computation of radial/distance user waypoint position when based on a fix
     with no mag var
 Fixed
     GPS Select discrete unexpectedly going invalid
 Fixed
     issues affecting the reliability of flight plan upload from Foreflight
 Fixed
     annunciations when approaches have no LNAV minima
 Fixed
     display units on multi-engine fuel flow display
 Fixed
     flight plan depiction on the map for some SIDs 
 Fixed
     incorrect ETA at destination when a visual approach is selected
 Fixed
     display of frequency list on newer IFD440s
 Fixed
     EGPWS outputs at low speeds
 Fixed
     Info page display of fuel types available
 Fixed
     lateral offset behavior when on a direct-to
 Fixed
     display of green radial line on the map when station has no VOR component
 Fixed
     maintenance mode issue that caused brightness to be dim until lighting
     page was accessed


 New Features / Improvements


 Added
     support for Vantage12
 Improved
     VOR sensitivity of the radio
 Added
     support for Bluetooth LE keyboards
 Improved
     maintenance mode discrete I/O page
 Added
     ability to clear alerts via remote switch
 Added
     support for NVIS-enabled IFDs
 Added
     support for Aspen display of Enroute VNAV


 General
 
  Added
      capability to retain Data/Plan/Map tab settings between power cycles
  Modified
      communication between units to show database mismatch, etc.
  Added
      support for displaying remote secondary weather frequencies 


 Aux
 
  Improved
      manual dimming control
  Improved
      user profile management
  Added
      “notices” to alert counts datablock
  Shared
      “system wide” user settings between IFDs


 Map
 
  Added
      ability to create a user waypoint by touching the map
  Added
      ability to select direct-to waypoint from the map
  Added
      map layer for user waypoints
  Map
      tab setting is retained across power cycles
  Added
      map layer for comm airspace types (TMZ, RMZ, Mode C, CFZ, MBZ)


 FMS
 
  Added
      aural chime for next leg alert 
  Improved
      performance of GPS steering on approach
  Improved
      visual approach capability when paired with KFC225 autopilot
  Improved
      stored route management
  
   Routes
       shared on command
   Allow
       selection of the sort order
   Enhanced
       display format
  
  Added
      “delete all” capability for user waypoints

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
AviSteve Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2332	Post Options Post Reply Quote AviSteve Report Post Thanks(0) Quote Reply Topic: Release 10.3.2.2 Posted: Yesterday at 11:57am
	Here are the release notes for 10.3.2.2 Bug Fixes Fixed bug that prevented user waypoints with special characters in the name from being loaded Fixed display of FIS frequencies in the FSS frequency list Fixed known issues with interface to GFC autopilots Fixed GAMA 429 output to prevent the display of active waypoint from being delayed on Aspen PFD Fixed bug that allowed selection of an approach when every transition contained an RF leg Fixed computation of radial/distance user waypoint position when based on a fix with no mag var Fixed GPS Select discrete unexpectedly going invalid Fixed issues affecting the reliability of flight plan upload from Foreflight Fixed annunciations when approaches have no LNAV minima Fixed display units on multi-engine fuel flow display Fixed flight plan depiction on the map for some SIDs Fixed incorrect ETA at destination when a visual approach is selected Fixed display of frequency list on newer IFD440s Fixed EGPWS outputs at low speeds Fixed Info page display of fuel types available Fixed lateral offset behavior when on a direct-to Fixed display of green radial line on the map when station has no VOR component Fixed maintenance mode issue that caused brightness to be dim until lighting page was accessed New Features / Improvements Added support for Vantage12 Improved VOR sensitivity of the radio Added support for Bluetooth LE keyboards Improved maintenance mode discrete I/O page Added ability to clear alerts via remote switch Added support for NVIS-enabled IFDs Added support for Aspen display of Enroute VNAV General Added capability to retain Data/Plan/Map tab settings between power cycles Modified communication between units to show database mismatch, etc. Added support for displaying remote secondary weather frequencies Aux Improved manual dimming control Improved user profile management Added “notices” to alert counts datablock Shared “system wide” user settings between IFDs Map Added ability to create a user waypoint by touching the map Added ability to select direct-to waypoint from the map Added map layer for user waypoints Map tab setting is retained across power cycles Added map layer for comm airspace types (TMZ, RMZ, Mode C, CFZ, MBZ) FMS Added aural chime for next leg alert Improved performance of GPS steering on approach Improved visual approach capability when paired with KFC225 autopilot Improved stored route management Routes shared on command Allow selection of the sort order Enhanced display format Added “delete all” capability for user waypoints
	Steve Lindsley Avidyne Engineering

AviSteve Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2332	Post Options Post Reply Quote AviSteve Report Post Thanks(0) Quote Reply Posted: 23 hours 44 minutes ago at 12:01pm
	10.3.2.2 is complete! We are doing a limited rollout to validate that it is working as expected. Once through that process, we will make it generally available. If you are specifically affected by a problem that would be resolved by the installation of 10.3.2.2 (e.g. GFC autopilot interface issues), then contact tech support for access.
	Steve Lindsley Avidyne Engineering

HenryM Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 13 Oct 2017 Location: Texas Status: Offline Points: 505	Post Options Post Reply Quote HenryM Report Post Thanks(0) Quote Reply Posted: 20 hours 13 minutes ago at 3:32pm
	Nice. I'm interested in the Foreflight flight plan upload fix. Once this version is generally released, will I be able to get a copy to have it installed by my A&P/IA? Edited by HenryM - 20 hours 13 minutes ago at 3:32pm

AviSteve Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2332	Post Options Post Reply Quote AviSteve Report Post Thanks(0) Quote Reply Posted: 19 hours 25 minutes ago at 4:20pm
	Yes, that's the plan.
	Steve Lindsley Avidyne Engineering

gherb Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 17 Sep 2015 Location: New Orleans Status: Offline Points: 26	Post Options Post Reply Quote gherb Report Post Thanks(0) Quote Reply Posted: 2 hours 1 minutes ago at 9:44am
	There is an issue with the IFD540, when flying a flight plan on autopilot GPSS, when a new flight plan is active (reverse flight plan on return, for example), and the IFD100 still has the old flight plan, when you open the iPad, the IFD100 flight plan takes priority over the IFD540 and the plane immediately tries to initiate a course reversal. Has this been resolved?